Skip to main content
Skip table of contents

Connecting the Twist Machine Paddle Shifter 3 to a Ford 6R80 Gen 2 Factory Controller

This guide describes how to connect the Twist Machine Paddle Shifter to Ford 6R80 Gen 2 Factory controllers that have the “SelectShift” function enabled.

Make the required power and ground connections to the paddle shifter receiver as per the install guide.

Make the following additional connections to complete the installation.

Ford PCM Harness Body Connector

Paddle Shifter Receiver


Pin 22

Pin 3 - White / Black


Pin 23

Pin 5 - White / Red


Pin 51

Pin 4 - White / Green

Downshift Common

Pin 6 - White

Upshift Common

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.